VDI Guideline 5708 “Bioprinting, methods and definitions”: What sounds technical and sober at first glance is an important step forward in the future field of 3D bioprinting. The guideline was developed under Dr. Hanna Hartmann from the NMI in Reutlingen and Prof. Dr. Jürgen Groll from the University Hospital of Würzburg. It creates a binding, practical basis for reproducible and quality-assured bioprinting procedures.

3D bioprinting is a great hope in the field of regenerative medicine to produce miniaturized tissues and organ precursors with biological functionality. Today, however, scientists are still working on the challenge of producing a printable and at the same time compatible starting material.

Scientists at the Max Planck Institute for Intelligent Systems developed a single-cell green microalgae coated with magnetic material. This miniature robot was put to the test: would the microalgae with its magnetic coating be able to swim through narrow spaces and, additionally, in a viscous fluid that mimics those found in the human body? Would the tiny robot be able to fight its way through these difficult conditions?

The German Federal Ministry of Education and Research (BMBF) is currently funding a project at the Department of Oral and Maxillofacial Surgery at Heidelberg University Hospital with around 1.2 million euros. The aim is to use 3D printing technology to produce individualized implants directly in the clinic, thus enabling faster, more efficient and more precise patient-specific care. To this end, the UKHD is working with an industrial partner.

3D tumor models, simulations of drug responses or plant stems used for testing heart stents: the 3R-BioMedicUS center at the University of Stuttgart is developing innovative biomedical approaches to improve preclinical studies, to be seen in the new video.

Research teams from the Universities of Konstanz and Potsdam are analyzing how proteins work together to enable our cells to both stick and move. The marker protein paxillin is at the centre of their interest.

For her ground-breaking scientific studies in the field of synthetic biology, the 2024 Alfried Krupp Advancement Award is to go to Prof. Dr Kerstin Göpfrich. The award, endowed with one million euros in funding, is granted annually by the Alfried Krupp von Bohlen und Halbach Foundation to young academics holding their first professorship in the natural and engineering sciences.

Printing a new cornea during an operation to restore a patient’s eyesight: This groundbreaking step in the fight against corneal disorders is set to become reality with a laser based process using personalized bioink. The method was developed by researchers at the Karlsruhe Institute of Technology (KIT) in collaboration with Carl Zeiss Meditec AG and Evonik Healthcare. Their project won the idea award in this year’s NEULAND innovation contest.

PhD student at Furtwangen University develops method for faster determination of antibiotic resistance. The increase in antibiotic-resistant pathogens and the associated treatment, which is a major problem in public healthcare facilities, is the subject of a research project at Furtwangen University.

An interdisciplinary research group combining mechanical engineering and biotechnology has taken up its work at the Institute for Molecular Systems Engineering and Advanced Materials (IMSEAM) of Heidelberg University. The team under the direction of Dr Kai Melde will pursue an innovative approach to biofabrication – 3D cell culture using ultrasound. Tools are being developed that can be used as an alternative to or enhancement for 3D printing.

Help with osteoarthritis of the knee - 27/09/2023

Individualised knee-joint cartilage: artificial tissue that fits

Knee joints are subject to considerable stress throughout our lives. The natural shock absorber cartilage wears out over a lifetime, so many people develop knee osteoarthritis. Treatment is available in the form of artificial cartilage. This "off-the-shelf" tissue often does not grow well. Researchers are developing an individualised cartilage replacement made from biomaterial that is produced by 3D printing based on MRI images.

"Programmable" polymer materials - 24/04/2023

Medicine of the future: intelligent 4D polymers from the printer

It is impossible to imagine medicine without 3D printing, which can be used to make implants or for culturing cells and tissues. It is now possible for 3D objects to be given an added dimension, namely an ability to make simple autonomous movements, by changing their size. Researchers at Heidelberg University have been able to produce microscopically small 4D structures from intelligent polymers that can be tailored to individual requirements.

Although just cute little creatures at first glance, the microscopic geckos and octopuses fabricated by 3D laser printing in the molecular engineering labs at Heidelberg University could open up new opportunities in fields such as microrobotics or biomedicine. The printed microstructures are made from novel materials – known as smart polymers – whose size and mechanical properties can be tuned on demand and with high precision.

Junior Professor Dr Daniela Duarte Campos has been awarded a substantial grant from the Federal Ministry of Education and Research (BMBF). She and her junior research group are investigating bioprinting for tissue and organ engineering at the Center for Molecular Biology of Heidelberg University and at the “3D Matter Made to Order” Cluster of Excellence, a collaboration between Ruperto Carola and Karlsruhe Institute of Technology (KIT).

Prof. Dr. Harald Gießen from the Institute of Physics (4) as well as Prof. Dr. Alois Herkommer and Dr. Simon Thiele from the Institute of Applied Optics at the University of Stuttgart received the Gips Schüle Research Award 2021 on October 19, 2021. The researchers were awarded the prize, which is valued at EUR 50,000.

Article - 14/04/2021

Calling for quality seal for implants

Today's seniors are older and more active, which is why implants remain in the body longer and are subjected to greater strain than before. Improved surfaces are expected to ensure that the implants heal and integrate into the bone optimally. In an interview with BIOPRO, Dietmar Schaffarczyk, CEO of Konstanz-based stimOS GmbH, explains why a voluntary quality seal makes sense and gives consumers a better chance of recognising high-quality…

Digitalisation in Medicine - 08/12/2020

DiHeSys takes steps towards application

Digital Health Systems GmbH (DiHeSys) has completed its founding phase and entered a new stage of development. This is reflected in the arrival of a new managing director, a strategic cooperation and its first pilot projects.