Project BlindZero - 03/08/2023 Hope for patients with eye diseases: human cornea from 3D printers Thousands of cornea transplants are performed every year. However, donors are rare and the procedure is not always without complications. Researchers at the University of Heidelberg are developing an innovative technique in the project BlindZero. It involves ‘printing’ human corneas directly onto patients’ eyes using 3D bioprinting. The reprogrammed genetically engineered cells used for this purpose are not expected to cause a rejection reaction.
NeuroQ project - 26/07/2023 Quantum sensors for exoskeletons: can quantum physics beat paralysis? Could people suddenly be able to move again decades after being paralysed? State-of-the-art quantum sensors integrated in exoskeletons could make this possible. Technology being developed as part of the BMBF-funded NeuroQ beacon project by researchers from organisations including the Fraunhofer IAF, the Charité in Berlin and the University of Stuttgart might achieve even more: besides facilitating movement, it could also help cure paralysis.
Tumour organoids facilitate drug discovery - 20/07/2023 Drug screening for children with cancer using patient-specific miniature tumours Standard drugs often don’t work in children and adolescents with recurrent cancer. Researchers from the Hopp Children's Tumour Centre (KITZ) and the German Cancer Research Center (DKFZ) in Heidelberg have been looking to open up new therapy options for those affected, and have cultivated individual miniature tumours from biopsy samples to test the effectiveness of a variety of drugs within a few weeks.
Expert interview - 05/07/2023 Every tenth of a degree matters when it comes to mitigating the consequences of global warming: sustainability measures in the laboratory The life sciences sector consumes huge quantities of energy and resources. This needs to change and we have to think differently. But how and where can sustainability measures be sensibly applied in the laboratory without compromising the quality of research results? Dr. Kerstin Hermuth-Kleinschmidt, owner of NIUB-Nachhaltigkeitsberatung, a company from Freiburg that focuses on sustainability in life sciences, tells BIOPRO how this can be done.
Expert interview - 28/06/2023 Money isn't all that is needed – knowledge and networking can also help start-ups move forward Dr. Rolf Neuhaus is one of the driving forces behind PALATINA Business Angels Rhein-Neckar e.V., a business angels association in the Rhine-Neckar metropolitan region. In an interview with BIOPRO, Neuhaus describes the association’s activities and explains where there is still catching up to be done in terms of start-up support in Baden-Württemberg.
Predicting the success of cancer treatment - 20/06/2023 Focusing on gut microbiome for CAR T-cell therapy Cancer immunotherapies use the body's own defences to fight tumour cells. An international consortium of researchers from Germany and the USA led by the DKFZ in Heidelberg has demonstrated that the effectiveness of CAR T-cell therapies greatly depends on the composition of the gut microbiome. The researchers have also developed a model for predicting the long-term response to the treatment.
Reduced immunosuppression possible in transplantations - 05/06/2023 Modified immune cells produce donor-specific tolerance Traditionally, transplant recipients have had to take immunosuppressive medication for life to prevent organ rejection. However, there are considerable side effects involved. Using modified immune cells (MICs), TolerogenixX GmbH from Heidelberg has now managed to generate donor-specific tolerance in recipients of living kidney transplants without suppressing the overall immune system.
Detecting drug resistance of tumour cells - 25/05/2023 AI-assisted diagnostics declares war on lung cancer Lung cancer is one of the most common cancers and has a particularly high mortality rate. A significant challenge in treating this disease lies in the resistance of lung tumours to conventional drug therapies, rendering chemotherapy ineffective. There is hope on the horizon as a team of experts from Baden-Württemberg has joined forces to develop an innovative AI-supported test procedure that paves the way for individualised therapy approaches.
Optogenetic cell analysis - 15/05/2023 opto biolabs: how frustration and inventiveness led to the establishment of a company When she found she had no suitable illumination devices for her doctoral thesis, Dr. Kathrin Brenker simply created her own customised adapters and founded a company called opto biolabs. Now, Brenker and company co-founder Luis Köbele sell two different types of devices. The main goal is to equip laboratories with illumination technologies that allow optogenetics methods to be used to accelerate development of optogenetic therapeutics.
"Programmable" polymer materials - 24/04/2023 Medicine of the future: intelligent 4D polymers from the printer It is impossible to imagine medicine without 3D printing, which can be used to make implants or for culturing cells and tissues. It is now possible for 3D objects to be given an added dimension, namely an ability to make simple autonomous movements, by changing their size. Researchers at Heidelberg University have been able to produce microscopically small 4D structures from intelligent polymers that can be tailored to individual requirements.
Tablet-based diagnostics - 12/04/2023 TuCAN - innovative diagnostic procedure for neuropsychiatric disorders Neuropsychiatric disorders are often diagnosed late and have a negative impact on quality of life. Diagnosing the disease at an early stage is vital to be able to help those affected by offering them treatment adapted to their specific requirements. This is what the TuCAN project in Tübingen aims to achieve through the early and differential diagnosis of neuropsychiatric disorders.
Inovedis GmbH’s innovative implant - 28/03/2023 Next-generation minimally invasive shoulder surgery The treatment of shoulder injuries such as rotator cuff tears is one of the most common orthopaedic interventions. It is therefore quite surprising that the surgical procedure has not changed much for decades - although it is relatively complicated. The start-up Inovedis has now developed a completely new surgical technique based on an implant that can be performed simply, safely, quickly and cost-effectively with minimal stress for patients.
